10KM long-distance wifi module wireless one-to-many installation and connection need to pay attention to the details. The wireless module has become very popular in modern wireless transmission systems, and has the advantages of simple construction, flexible application, and convenient maintenance. As we all know, the 10KM long-distance wifi module can transmit one-to-one or one-to-many transmission as needed. In the one-to-many transmission scheme, the 10KM long-distance wifi module undoubtedly saves a lot of cost investment for the entire project. Today, we'll look at the issues that wireless needs to be aware of when making a one-to-many connection.
1. One-to-many is that one receiver corresponds to multiple transmitters, and the transmitter is usually connected to the front end. When designing a one-to-many system, it must be noted that the angle between the two transmitters should not be too large, usually around 20 degrees; in addition, the transmission distance between the front-end transmitter and receiver should not be too far, sometimes due to Environmental constraints must be too far away, and at least the transmission link must be on one line, otherwise the stability of transmission quality cannot be guaranteed.
2. In the one-to-many long-distance wifi module solution, the camera must use a network camera, because the analog device cannot perform one-to-many transmission, and is only suitable for one-to-one wireless transmission.
3. If the distance between monitoring points is short and the transmission distance is less than 800 meters, omnidirectional reception can be considered.
4.10KM long-distance wifi module must consider the transmission bandwidth when doing one-to-many. The pixel of the camera is also an important factor affecting the bandwidth. If the pixels of the camera are too large, resulting in too much bandwidth, it is easy to cause unstable transmission, or even incomplete transmission.
To do a one-to-many wireless network transmission scheme, there is basically no problem in doing the above points, but for installation details, such as antenna angle adjustment, transmission bandwidth problems, or professional technicians are required. Therefore, it is very important to find an equipment supplier with a professional technical team.
When applying the 10KM long-distance wifi module, it is easy to ignore the details. Nowadays, with the continuous enhancement of people's security awareness, the application of monitoring is becoming more and more common. Among them, digital wireless modules are widely used in the security monitoring industry, including on-site monitoring, factory monitoring, forest fire monitoring, scenic gardens, oilfield mining, salt field mining, marine aquaculture and other industries. However, for the 10KM long-distance wifi module, many unprofessional engineers tend to ignore some small details, resulting in unstable transmission of the entire wireless bridge monitoring system, such as the following two details.
1. Outdoor installation of wireless module should pay attention to waterproof matters:
Many friends who have just started 10KM long-distance wifi modules will ignore the rain problem in rainy weather when installing wireless devices, which will cause subsequent equipment to flood the module and damage the module, resulting in transmission interruption.
2. Correct fixing direction of the wireless module:
In the process of wireless transmission, a local area network is established by two modules, one sending and one receiving, to complete the wireless transmission system. When the 10KM long-distance wifi module is installed, the installation position and angle are calibrated. The orientation of the device is very important, which directly affects the quality of the transmitted signal. Our installation position must ensure the visual transmission between the transmitting and receiving equipment, the transmitting and receiving equipment are in the same straight line transmission angle adjustment, the direction of the equipment must be front, the same vertical installation net.
In addition, before installing wireless, we also need to understand the actual project site environment, such as whether there is strong radar interference; the straight-line transmission distance from the front-end camera to the monitoring center; the type of monitoring cameras used in the monitoring center and the distribution location of monitoring points. Only by understanding these, we can know the specific installation method of the wireless bridge.
Of course, if you don’t know much about these, you can consult a professional 10KM long-distance wifi module manufacturer. We are such a company. Each product of the company has been tested for 12 months, and the product performance has the quality of industrial wireless transmission. Our professional technical and after-sales team can make users worry-free when building and using wireless transmission systems.
